Low foaming powder for acidic cleaning of all types milk analyzers Lactoscan according their instructions. The product very effectively removes milk stone and hard water deposits thus improving hygienic status of all milking equipment. May be used for manual application as well as for automatic circulation cleaning.
Pre-rinse with sufficient water to remove milk residues.
Circulate a 1% (10gl) cleaning solution for 10 to 20 minutes at temperature above 40 C
Rinse thoroughly with tap water
Use 0.5 -1.0% (5 - 10g/l) after sufficient pre-rising at 30 to 40 c soak for at least 10 minutes rinse thoroughly with tap water.
Determination of concentration Titration of p-value with 1 N sodium hydroxide
Special instructions Keep container closed and away from humidity.
Material compatibility Stainless steel is not affected by the solution Aluminium is slightly etched.
Physical and chemical properties
Appearance: white powder odour: faintly of surfactant
Ph-value (1%) 1.6
Composition: Sulfamic acid
Hazard label: Xi, irritant
Risks R36/38 - Irritating to eyes and skin. R52/53 - Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment.
For health and safety information, refer to the Safety Data Sheet (SDS) for this product